FEP Resin
PHYSICAL PROPERTIE
| Item | Unit | MK-11 | MK-12 | MK-13 | Test Method / Standards | ||
| A | B | H | |||||
| Appearance | / | Semi-transparent pellets, free from inclusions such as metal scraps and sand grains. The percentage of pellets with visible black spots shall not exceed 1%. | HG/T 2904 | ||||
| Melt Flow Index | g/10min | 0.8~2.0 | 2.1~5.0 | 5.1~8.0 | 8.1~12.0 | 5.1~12.0 | GB/T 3682 |
| Tensile Stress，≥ | MPa | 28.0 | 26.0 | 22.0 | 25.0 | GB/T 1040 | |
| Strain at Break，≥ | % | 320 | 310 | 310 | 330 | GB/T 1040 | |
| Relative Density | / | 2.12~2.17 | GB/T 1033 | ||||
| Melting Point | ℃ | 265±10 | GB/T 28724 | ||||
| Dielectric Constant
(106Hz)，≤ |
/ | 2.15 | 2.07 | GB/T 1409 | |||
| Dielectric Dissipation Factor
(106Hz)，≤ |
/ | 7.0×10-4 | 5.7×10-4 | GB/T 1409 | |||
| Heat-Resistant Stress Cracking | / | No cracking | / | HG/T 2904 | |||
| MIT Flex Endurance，≥ | cycles | / | / | 30000 | ASTM-D2176 | ||
Product Description
Polyperfluoroethylene-propylene resin (FEP) is a copolymer of tetrafluoroethylene and hexafluoropropylene. It has good thermal stability, outstanding chemical inertness, excellent electrical insulation and low friction coefficient, and can be processed by thermoplastic processing methods.
Implementation standard: Q/0321DYS 003
Application
MK-11: A high-molecular-weight, low-melt-index resin and molding material resistant to thermal stress cracking. It is used in applications requiring stress-cracking resistance where processing speeds are low to moderate. Key applications include heat-shrinkable tubing; linings for pumps, valves, and piping; and wire insulation.
MK-12: An extrusion-grade plastic resistant to environmental stress cracking, primarily used for wire insulation and thin-walled tubing.
MK-13: A general-purpose resin for extrusion processing, primarily used for wire insulation, tubing, and films, as well as in applications requiring specific flexural properties, such as automotive cables.
Packaging
- Packed in polyethylene plastic bags, and then sealed in outer packaging bags, each bag contains a net weight of 25 kg.
Transportation & Storage
Transportation: Non-toxic, non-flammable, non-explosive, and non-corrosive; transported as non-hazardous goods.
Storage: Stored in a clean, dry, cool, and dark environment, preventing the introduction of impurities.
Attention
The processing temperature should not exceed 420 ℃ to avoid decomposition and the generation of toxic gases.
