MK-302 ACR Impact Modifier (Acrylic Impact Modifier)
PHYSICAL PROPERTIES
| Item | Specification |
| Appearance | White free-flowing powder |
| Volatile Content, % | ≤1.0% |
| 0.075 mm Residue on 0.075 mm sieve | ≤1.0% |
| Recommended Dosage, phr | 2.0～5.0 Based on 100 parts PVC resin |
MK-303 PVC Plasticization Promoter & Processing Regulator
PHYSICAL PROPERTIES
| (Item) | (Specification) |
| (Appearance) | (White powder) |
| (Volatile Content, %) | ≤1.0% |
| (Residue on 0.075 mm sieve) | ≤1.0% |
| (Recommended Dosage, phr) | 0.8～2.0 (Based on 100 parts PVC resin) |
MK-304 PVC Foaming Regulator
PHYSICAL PROPERTIES
| (Item) | (Specification) |
| (Appearance) | (White powder) |
| (Volatile Content, %) | ≤1.0% |
| (Residue on 0.075 mm sieve) | ≤1.0% |
| (Recommended Dosage, phr) | 2.0～6.0 (Based on 100 parts PVC resin) |
MK-305 DOP Plasticizer (Dioctyl Phthalate)
PHYSICAL PROPERTIES
| Item | Index |
| Appearance | Transparent oily liquid without visible impurities |
| Chroma, (platinum cobalt) number | 13 |
| Purity, % | 99.60 |
| Density (20 ℃), g / cm³ | 0.9838 |
| Acidity (as phthalic acid), % | 0.0022 |
| Moisture, % | 0.011 |
| Flash point, ℃ | 210 |
| Volume resistivity, ×10⁹ Ω·m | 6.00 |
MK-306 DOTP Plasticizer (Dioctyl Terephthalate)
PHYSICAL PROPERTIES
| Item | Index |
| Appearance | Transparent oily liquid without visible impurities |
| Chroma, (platinum cobalt) number | 15 |
| Purity, % | 99.60 |
| Density (20 ℃), g/ cm³ | 0.9824 |
| Acidity (as phthalic acid), % | 0.008 |
| Moisture, % | 0.018 |
| Flash point, ℃ | 210 |
| Volume resistivity, ×10¹⁰ Ω*m | 11.60 |
MK-307 ESO Plasticizer (Epoxidized Soybean Oil)
PHYSICAL PROPERTIES
| Item | Index |
| Appearance | Light yellow viscous oily liquid |
| Color (platinum-cobalt color comparison) | ≤360# |
| Specific gravity (20℃) | 0.985-1 |
| Epoxy value (%) | ≥6.0 |
| Acid value (mgKOH/g) | ≤1.5 |
| Iodine value (%) | ≤6.0 |
| Heating loss (125℃-2H) | 0.3% |
| Thermal stability (177℃-3H) | 93.5% |
| Flash point (open cup) | 260℃ |
MK-880 Processing Aid for Transparent PVC Products
PHYSICAL PROPERTIES
| (Item) | (Specification) |
| (Appearance) | (White powder) |
| (Volatile Content, %) | ≤1.0% |
| (Residue on 0.075 mm sieve) | ≤1.0% |
| (Recommended Dosage, phr) | 1.0～3.0 (Based on 100 parts PVC resin) |
AC-1600 General-Purpose Yellow Foaming Agent
PHYSICAL PROPERTIES
| Item | Specification |
| Appearance | Light yellow crystalline free-flowing powder |
| Decomposition Temperature | 205–220°C（165–185°C with activator） |
| Gas Yield | 220～230 mL/g |
| Volatile Content | ≤0.2% |
| Fineness | ≥99.8% pass through 325 mesh |
| Average Particle Size | AC-1600：6～10 μm；AC-2000：3～6 μm |
| Bulk Density | 0.40～0.50 g/cm³ |
| Purity | ≥99.2% |
| Recommended Dosage, phr per 100 parts PVC resin | See below |
| PVC high-expansion advertising foam board / Forex board | 1.0～1.8 phr |
| PVC free foam boards / Decorative panels | 0.8～1.5 phr |
| PVC artificial leather / Foam backing / Footwear foam layer | 1.2～2.5 phr |
| PVC high-expansion lightweight profiles & pipes | 1.5～3.0 phr |
| Activator addition | ZnO / Zinc Stearate: 5–10% of AC dosage |
AC-2000 High-Fineness Yellow Foaming Agent
PHYSICAL PROPERTIES
| Item | Specification |
| Appearance | Light yellow crystalline free-flowing powder |
| Decomposition Temperature | 205–220°C（165–185°C with activator） |
| Gas Yield | 220～230 mL/g |
| Volatile Content | ≤0.2% |
| Fineness | ≥99.8% pass through 325 mesh |
| Average Particle Size | AC-1600：6～10 μm；AC-2000：3～6 μm |
| Bulk Density | 0.40～0.50 g/cm³ |
| Purity | ≥99.2% |
| Recommended Dosage, phr per 100 parts PVC resin | See below |
| PVC high-expansion advertising foam board / Forex board | 1.0～1.8 phr |
| PVC free foam boards / Decorative panels | 0.8～1.5 phr |
| PVC artificial leather / Foam backing / Footwear foam layer | 1.2～2.5 phr |
| PVC high-expansion lightweight profiles & pipes | 1.5～3.0 phr |
| Activator addition | ZnO / Zinc Stearate: 5–10% of AC dosage |
NC-130 Low-Temperature Endothermic White Foaming Agent
PHYSICAL PROPERTIES
| Item | Specification |
| Appearance | White free-flowing fine powder |
| Decomposition Temperature | NC-130：130～160°C；NC-150：150～190°C |
| Gas Yield | 130～155 mL/g |
| Volatile Content | ≤0.3% |
| Fineness | ≥99.5% pass through 325 mesh |
| Average Particle Size | 8～10 μm |
| Bulk Density | 0.45～0.55 g/cm³ |
| Ash Content | ≤1.0% |
| Recommended Dosage, phr per 100 parts PVC resin | See below |
| PVC low-foam advertising board / Celuka foam board | 0.6～1.2 phr |
| PVC/WPC foam door panels, wall panels, skirting | 0.8～1.5 phr |
| PVC soft foam insoles, interior parts, sealing strips | 0.3～0.7 phr |
| Eco-friendly food-contact PVC foam products | 0.5～1.0 phr |
| Used with AC blowing agent | 0.3～0.6 phr |
NC-150 Medium-Temperature Endothermic White Foaming Agent
PHYSICAL PROPERTIES
| (Item) | (Specification) |
| (Appearance) | (White free-flowing fine powder) |
| (Decomposition Temperature) | NC-130：130～160°C；NC-150：150～190°C |
| (Gas Yield) | 130～155 mL/g |
| (Volatile Content) | ≤0.3% |
| (Fineness) | ≥99.5% pass through 325 mesh |
| (Average Particle Size) | 8～10 μm |
| (Bulk Density) | 0.45～0.55 g/cm³ |
| (Ash Content) | ≤1.0% |
| (Recommended Dosage, phr per 100 parts PVC resin) | See below / See the table below. |
| (PVC low-foam advertising board / Celuka foam board) | 0.6～1.2 phr |
| (PVC/WPC foam door panels, wall panels, skirting) | 0.8～1.5 phr |
| (PVC soft foam insoles, interior parts, sealing strips) | 0.3～0.7 phr |
| (Eco-friendly food-contact PVC foam products) | 0.5～1.0 phr |
| (Used with AC blowing agent) | 0.3～0.6 phr |
FBA 184 (Optical Brightener OB)
PHYSICAL PROPERTIES
| (Item) | (Specification) |
| (Appearance) | (Light yellow crystalline powder) |
| (Melting Point, ℃) | 198～202 |
| (Purity, %) | ≥99.0% |
| (Volatile Content, %) | ≤0.5% |
| (Particle Size, ≥325 mesh pass rate) | ≥99.0% |
| (Max. Absorption Wavelength, nm) | 372 ± 2 |
| (Max. Emission Wavelength, nm) | 430 ± 2 |
| (Ash Content, %) | ≤0.5% |
| (Recommended Dosage for PVC, phr) | 0.015～0.04 (Based on 100 parts PVC resin) |
